USL, CNL – Adapters, low voltage power switching devices, Series UAL, followed by “-”, followed by S16, S20, S25, S32, S50 or s60, followed by D, E or G, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S.
Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, -300, -400, -600, and –800, may be followed by /R, may be followed by /4, and models MC, followed by -185a, -225a, -265a, -330a, -400a, -500a, -600a, -630a and -800a, may be followed by /R, may be followed by /4, and models MC, followed by -100a/4, -130a/4, 150a/4 , -185a/4, -225a/4, -330a/4, -400a/4, -500a/4, -630a/4 and -800a/4. Accessory latch units AL-100, -150, -200, -400, interlock units AR-100, -180, -600, -600 V
Accessory Devices on Circuit Breaker : USL – Aux Switch (High capacity type), USL – Aux Switch (standard type), USL – Ready To Close Switch, USL – Charging Motor, USL – Thermo Sensor, USL – Trio Unit, USL – UVT Delay Controller, USL – Voltage Divide Module, USL – Counter, USL – Key Lock for Circuit Breaker, USL – Kirk Key, USL – PROFALUX KEY, USL – Key lock frame, USL – Button Lock for Circuit Breaker, USL – NCT Module, USL – Rating Plug, USL – Terminal Connection, Accessory Devices on Adaptor : USL – Cell Position Switches (drawout circuit breaker), USL – Door Interlock (drawout circuit breaker), USL – Safety Shutter (drawout circuit breaker), USL – Rack-in Interlock (drawout circuit breaker), USL – Mechanical Interlock (drawout circuit breaker), USL – Miss Insert Protection (drawout circuit breaker), USL – Mechanical Operated Cell Switch, Standard type (drawout circuit breaker), USL – Mechanical Operated Cell Switch, High capacity type (drawout circuit breaker), Field Installation Kit : USL – Door Frame, USL – Dust Cover, USL – Long Type Handle, USL – Bus Connection Kit, USL – Lifting Hook
Circuit Breakers with Equipment Ground-fault Protection Types UTS800N, UTS800H and UTS800L, rated 400 through 800 A, 600 V ac, three poles, Types UTS1200N, UTS1200P, UTS1200H and UTS1200L, rated 800 through 1200 A, 600 V ac, three poles, Types UTS400N, UTS400H and UTS400L, rated 250, 400 A, 600 V ac, three poles, Types UTS600N, UTS600H and UTS600L, rated 400, 600 A, 600 V ac, three poles.
Combination Motor Controllers, Type C Combination Motor Controllers consisting of LSIS Inverse-Time Circuit Breakers, MC series Contactors and MT series Overload Relays, Combination Motor Controllers, Type A Combination Motor Controllers consisting of SOCOMEC or ABB OY LOW VOLTAGE SWITCHES Manual Disconnect Device, Branch Circuit Protection Fuse, LSIS MC series Contactors and LSIS MT series Overload Relays
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by U, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
COMPONENT – CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Truck for PT/CPT, Cat. Nos. UPTR, followed by “-”, followed by 05 or 15, followed by PY, PD, CP, PS, PA or NPA, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Cradle for PT/CPT Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by A or B, followed by 15, followed by A, B or C, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Compartments for PT, Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by AL, AM, AF, AE, BC, BF, BE, NAL, NAM, NAF or NAE, followed by 25 or 32, followed by A, followed by 12 or 20.
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by A, B, R or S, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
MMS Series. Models MMS-32 followed by H or HI or S, maybe followed by -0.16, -0.25, -0.40, -0.63, -1.0, -1.6, -2.5, -4.0, -6.0, -8.0, -10, -13, -17, -22, -26, –32 or -40. Models MMS-63 followed by H or HI or S, maybe followed by -10, -13, -17, -22, -26, -32, -40, -50, –63 or -65. Models MMS-100 followed by H or HI or S, maybe followed by -17, -22, -26, -32, -40, -50, -63, -75, -90 or -100, MMS Front Mounted Auxiliary Contact Block Accessory Model FX, MMS Side Mounted Auxiliary Contact Block Accessory Model LX, MMS Shunt Release Accessory RS Series, MMS Undervoltage Release Accessory RU Series, MMS Undervoltage Release with Switch Accessory RUX Series, MMS Alarm Switch Accessory Model LA, MMS Alarm Switch for Magnetic Trip Accessory Model LAM, MMS Phase-Bus Devices, Type PB-322, PBL-322, PB-323, PBL-323, PB-324, PB-325, PB-632 and PB-633, Direct Adaptor devices, Type DA, followed by –16, –32, 63 or 95, MEH Handles for MMS Series, Models MEH followed by -32, -63 or -100, maybe followed by R, followed by -115 or -315, MMS Line Terminal Block, Type LTB-32, MMS Terminal Block, Type TB-32
Molded Case Switches, Types UTE100E MCS, UTE100N MCS, UTS150N MCS, UTS150H MCS, UTS150L MCS, UTS250N MCS, UTS250H MCS, UTS250L MCS, UTS400N MCS, UTS400H MCS, UTS400L MCS, UTS600N MCS, UTS600H MCS, UTS600L MCS, UTS800N MCS, UTS800H MCS and UTS800L MCS, UTS1200N MCS, UTS1200P MCS, UTS1200H MCS and UTS1200L MCS
ADAPTERS, CIRCUIT BREAKER : USL – Adapters, Molded-case Switches, Series UDL, followed by “-”, followed by S25, S32 or S40, followed by E, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S, may be followed by (P1) or (P2).
Circuit breaker or molded case switch accessory, alarm switch, auxiliary switch, shunt trip, and undervoltage trip intended for installation in Type UTE 100, TD 125NU, TD 125HU, TD 125NA, UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600, TS 800NU, TS 800HU, TS 800NA, UTS 800, UTS 1200
USL/CNL – Circuit breaker or molded case switch accessory, Motor Operator(MOP), type MOP-2U and MOP-3U intended for installation in Type UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600 circuit breakers or molded case switches
USL, CNL – Adapters, low voltage power switching devices, Series UAL, followed by “-”, followed by S16, S20, S25, S32, S50 or s60, followed by D, E or G, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S.
Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, -300, -400, -600, and –800, may be followed by /R, may be followed by /4, and models MC, followed by -185a, -225a, -265a, -330a, -400a, -500a, -600a, -630a and -800a, may be followed by /R, may be followed by /4, and models MC, followed by -100a/4, -130a/4, 150a/4 , -185a/4, -225a/4, -330a/4, -400a/4, -500a/4, -630a/4 and -800a/4. Accessory latch units AL-100, -150, -200, -400, interlock units AR-100, -180, -600, -600 V
Accessory Devices on Circuit Breaker : USL – Aux Switch (High capacity type), USL – Aux Switch (standard type), USL – Ready To Close Switch, USL – Charging Motor, USL – Thermo Sensor, USL – Trio Unit, USL – UVT Delay Controller, USL – Voltage Divide Module, USL – Counter, USL – Key Lock for Circuit Breaker, USL – Kirk Key, USL – PROFALUX KEY, USL – Key lock frame, USL – Button Lock for Circuit Breaker, USL – NCT Module, USL – Rating Plug, USL – Terminal Connection, Accessory Devices on Adaptor : USL – Cell Position Switches (drawout circuit breaker), USL – Door Interlock (drawout circuit breaker), USL – Safety Shutter (drawout circuit breaker), USL – Rack-in Interlock (drawout circuit breaker), USL – Mechanical Interlock (drawout circuit breaker), USL – Miss Insert Protection (drawout circuit breaker), USL – Mechanical Operated Cell Switch, Standard type (drawout circuit breaker), USL – Mechanical Operated Cell Switch, High capacity type (drawout circuit breaker), Field Installation Kit : USL – Door Frame, USL – Dust Cover, USL – Long Type Handle, USL – Bus Connection Kit, USL – Lifting Hook
Circuit Breakers with Equipment Ground-fault Protection Types UTS800N, UTS800H and UTS800L, rated 400 through 800 A, 600 V ac, three poles, Types UTS1200N, UTS1200P, UTS1200H and UTS1200L, rated 800 through 1200 A, 600 V ac, three poles, Types UTS400N, UTS400H and UTS400L, rated 250, 400 A, 600 V ac, three poles, Types UTS600N, UTS600H and UTS600L, rated 400, 600 A, 600 V ac, three poles.
Combination Motor Controllers, Type C Combination Motor Controllers consisting of LSIS Inverse-Time Circuit Breakers, MC series Contactors and MT series Overload Relays, Combination Motor Controllers, Type A Combination Motor Controllers consisting of SOCOMEC or ABB OY LOW VOLTAGE SWITCHES Manual Disconnect Device, Branch Circuit Protection Fuse, LSIS MC series Contactors and LSIS MT series Overload Relays
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by U, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
COMPONENT – CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Truck for PT/CPT, Cat. Nos. UPTR, followed by “-”, followed by 05 or 15, followed by PY, PD, CP, PS, PA or NPA, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Cradle for PT/CPT Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by A or B, followed by 15, followed by A, B or C, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Compartments for PT, Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by AL, AM, AF, AE, BC, BF, BE, NAL, NAM, NAF or NAE, followed by 25 or 32, followed by A, followed by 12 or 20.
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by A, B, R or S, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
MMS Series. Models MMS-32 followed by H or HI or S, maybe followed by -0.16, -0.25, -0.40, -0.63, -1.0, -1.6, -2.5, -4.0, -6.0, -8.0, -10, -13, -17, -22, -26, –32 or -40. Models MMS-63 followed by H or HI or S, maybe followed by -10, -13, -17, -22, -26, -32, -40, -50, –63 or -65. Models MMS-100 followed by H or HI or S, maybe followed by -17, -22, -26, -32, -40, -50, -63, -75, -90 or -100, MMS Front Mounted Auxiliary Contact Block Accessory Model FX, MMS Side Mounted Auxiliary Contact Block Accessory Model LX, MMS Shunt Release Accessory RS Series, MMS Undervoltage Release Accessory RU Series, MMS Undervoltage Release with Switch Accessory RUX Series, MMS Alarm Switch Accessory Model LA, MMS Alarm Switch for Magnetic Trip Accessory Model LAM, MMS Phase-Bus Devices, Type PB-322, PBL-322, PB-323, PBL-323, PB-324, PB-325, PB-632 and PB-633, Direct Adaptor devices, Type DA, followed by –16, –32, 63 or 95, MEH Handles for MMS Series, Models MEH followed by -32, -63 or -100, maybe followed by R, followed by -115 or -315, MMS Line Terminal Block, Type LTB-32, MMS Terminal Block, Type TB-32
Molded Case Switches, Types UTE100E MCS, UTE100N MCS, UTS150N MCS, UTS150H MCS, UTS150L MCS, UTS250N MCS, UTS250H MCS, UTS250L MCS, UTS400N MCS, UTS400H MCS, UTS400L MCS, UTS600N MCS, UTS600H MCS, UTS600L MCS, UTS800N MCS, UTS800H MCS and UTS800L MCS, UTS1200N MCS, UTS1200P MCS, UTS1200H MCS and UTS1200L MCS
ADAPTERS, CIRCUIT BREAKER : USL – Adapters, Molded-case Switches, Series UDL, followed by “-”, followed by S25, S32 or S40, followed by E, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S, may be followed by (P1) or (P2).
Circuit breaker or molded case switch accessory, alarm switch, auxiliary switch, shunt trip, and undervoltage trip intended for installation in Type UTE 100, TD 125NU, TD 125HU, TD 125NA, UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600, TS 800NU, TS 800HU, TS 800NA, UTS 800, UTS 1200
USL/CNL – Circuit breaker or molded case switch accessory, Motor Operator(MOP), type MOP-2U and MOP-3U intended for installation in Type UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600 circuit breakers or molded case switches
USL, CNL – Adapters, low voltage power switching devices, Series UAL, followed by “-”, followed by S16, S20, S25, S32, S50 or s60, followed by D, E or G, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S.
Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, -300, -400, -600, and –800, may be followed by /R, may be followed by /4, and models MC, followed by -185a, -225a, -265a, -330a, -400a, -500a, -600a, -630a and -800a, may be followed by /R, may be followed by /4, and models MC, followed by -100a/4, -130a/4, 150a/4 , -185a/4, -225a/4, -330a/4, -400a/4, -500a/4, -630a/4 and -800a/4. Accessory latch units AL-100, -150, -200, -400, interlock units AR-100, -180, -600, -600 V
Accessory Devices on Circuit Breaker : USL – Aux Switch (High capacity type), USL – Aux Switch (standard type), USL – Ready To Close Switch, USL – Charging Motor, USL – Thermo Sensor, USL – Trio Unit, USL – UVT Delay Controller, USL – Voltage Divide Module, USL – Counter, USL – Key Lock for Circuit Breaker, USL – Kirk Key, USL – PROFALUX KEY, USL – Key lock frame, USL – Button Lock for Circuit Breaker, USL – NCT Module, USL – Rating Plug, USL – Terminal Connection, Accessory Devices on Adaptor : USL – Cell Position Switches (drawout circuit breaker), USL – Door Interlock (drawout circuit breaker), USL – Safety Shutter (drawout circuit breaker), USL – Rack-in Interlock (drawout circuit breaker), USL – Mechanical Interlock (drawout circuit breaker), USL – Miss Insert Protection (drawout circuit breaker), USL – Mechanical Operated Cell Switch, Standard type (drawout circuit breaker), USL – Mechanical Operated Cell Switch, High capacity type (drawout circuit breaker), Field Installation Kit : USL – Door Frame, USL – Dust Cover, USL – Long Type Handle, USL – Bus Connection Kit, USL – Lifting Hook
Circuit Breakers with Equipment Ground-fault Protection Types UTS800N, UTS800H and UTS800L, rated 400 through 800 A, 600 V ac, three poles, Types UTS1200N, UTS1200P, UTS1200H and UTS1200L, rated 800 through 1200 A, 600 V ac, three poles, Types UTS400N, UTS400H and UTS400L, rated 250, 400 A, 600 V ac, three poles, Types UTS600N, UTS600H and UTS600L, rated 400, 600 A, 600 V ac, three poles.
Combination Motor Controllers, Type C Combination Motor Controllers consisting of LSIS Inverse-Time Circuit Breakers, MC series Contactors and MT series Overload Relays, Combination Motor Controllers, Type A Combination Motor Controllers consisting of SOCOMEC or ABB OY LOW VOLTAGE SWITCHES Manual Disconnect Device, Branch Circuit Protection Fuse, LSIS MC series Contactors and LSIS MT series Overload Relays
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by U, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
COMPONENT – CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Truck for PT/CPT, Cat. Nos. UPTR, followed by “-”, followed by 05 or 15, followed by PY, PD, CP, PS, PA or NPA, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Cradle for PT/CPT Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by A or B, followed by 15, followed by A, B or C, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Compartments for PT, Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by AL, AM, AF, AE, BC, BF, BE, NAL, NAM, NAF or NAE, followed by 25 or 32, followed by A, followed by 12 or 20.
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by A, B, R or S, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
MMS Series. Models MMS-32 followed by H or HI or S, maybe followed by -0.16, -0.25, -0.40, -0.63, -1.0, -1.6, -2.5, -4.0, -6.0, -8.0, -10, -13, -17, -22, -26, –32 or -40. Models MMS-63 followed by H or HI or S, maybe followed by -10, -13, -17, -22, -26, -32, -40, -50, –63 or -65. Models MMS-100 followed by H or HI or S, maybe followed by -17, -22, -26, -32, -40, -50, -63, -75, -90 or -100, MMS Front Mounted Auxiliary Contact Block Accessory Model FX, MMS Side Mounted Auxiliary Contact Block Accessory Model LX, MMS Shunt Release Accessory RS Series, MMS Undervoltage Release Accessory RU Series, MMS Undervoltage Release with Switch Accessory RUX Series, MMS Alarm Switch Accessory Model LA, MMS Alarm Switch for Magnetic Trip Accessory Model LAM, MMS Phase-Bus Devices, Type PB-322, PBL-322, PB-323, PBL-323, PB-324, PB-325, PB-632 and PB-633, Direct Adaptor devices, Type DA, followed by –16, –32, 63 or 95, MEH Handles for MMS Series, Models MEH followed by -32, -63 or -100, maybe followed by R, followed by -115 or -315, MMS Line Terminal Block, Type LTB-32, MMS Terminal Block, Type TB-32
Molded Case Switches, Types UTE100E MCS, UTE100N MCS, UTS150N MCS, UTS150H MCS, UTS150L MCS, UTS250N MCS, UTS250H MCS, UTS250L MCS, UTS400N MCS, UTS400H MCS, UTS400L MCS, UTS600N MCS, UTS600H MCS, UTS600L MCS, UTS800N MCS, UTS800H MCS and UTS800L MCS, UTS1200N MCS, UTS1200P MCS, UTS1200H MCS and UTS1200L MCS
ADAPTERS, CIRCUIT BREAKER : USL – Adapters, Molded-case Switches, Series UDL, followed by “-”, followed by S25, S32 or S40, followed by E, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S, may be followed by (P1) or (P2).
Circuit breaker or molded case switch accessory, alarm switch, auxiliary switch, shunt trip, and undervoltage trip intended for installation in Type UTE 100, TD 125NU, TD 125HU, TD 125NA, UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600, TS 800NU, TS 800HU, TS 800NA, UTS 800, UTS 1200
USL/CNL – Circuit breaker or molded case switch accessory, Motor Operator(MOP), type MOP-2U and MOP-3U intended for installation in Type UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600 circuit breakers or molded case switches
USL, CNL – Adapters, low voltage power switching devices, Series UAL, followed by “-”, followed by S16, S20, S25, S32, S50 or s60, followed by D, E or G, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S.
Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, Industrial Control Equipment, Magnetic Motor Controllers, Models GMC, followed by -100, -125, -150, -180, -220, -300, -400, -600, and –800, may be followed by /R, may be followed by /4, and models MC, followed by -185a, -225a, -265a, -330a, -400a, -500a, -600a, -630a and -800a, may be followed by /R, may be followed by /4, and models MC, followed by -100a/4, -130a/4, 150a/4 , -185a/4, -225a/4, -330a/4, -400a/4, -500a/4, -630a/4 and -800a/4. Accessory latch units AL-100, -150, -200, -400, interlock units AR-100, -180, -600, -600 V
Accessory Devices on Circuit Breaker : USL – Aux Switch (High capacity type), USL – Aux Switch (standard type), USL – Ready To Close Switch, USL – Charging Motor, USL – Thermo Sensor, USL – Trio Unit, USL – UVT Delay Controller, USL – Voltage Divide Module, USL – Counter, USL – Key Lock for Circuit Breaker, USL – Kirk Key, USL – PROFALUX KEY, USL – Key lock frame, USL – Button Lock for Circuit Breaker, USL – NCT Module, USL – Rating Plug, USL – Terminal Connection, Accessory Devices on Adaptor : USL – Cell Position Switches (drawout circuit breaker), USL – Door Interlock (drawout circuit breaker), USL – Safety Shutter (drawout circuit breaker), USL – Rack-in Interlock (drawout circuit breaker), USL – Mechanical Interlock (drawout circuit breaker), USL – Miss Insert Protection (drawout circuit breaker), USL – Mechanical Operated Cell Switch, Standard type (drawout circuit breaker), USL – Mechanical Operated Cell Switch, High capacity type (drawout circuit breaker), Field Installation Kit : USL – Door Frame, USL – Dust Cover, USL – Long Type Handle, USL – Bus Connection Kit, USL – Lifting Hook
Circuit Breakers with Equipment Ground-fault Protection Types UTS800N, UTS800H and UTS800L, rated 400 through 800 A, 600 V ac, three poles, Types UTS1200N, UTS1200P, UTS1200H and UTS1200L, rated 800 through 1200 A, 600 V ac, three poles, Types UTS400N, UTS400H and UTS400L, rated 250, 400 A, 600 V ac, three poles, Types UTS600N, UTS600H and UTS600L, rated 400, 600 A, 600 V ac, three poles.
Combination Motor Controllers, Type C Combination Motor Controllers consisting of LSIS Inverse-Time Circuit Breakers, MC series Contactors and MT series Overload Relays, Combination Motor Controllers, Type A Combination Motor Controllers consisting of SOCOMEC or ABB OY LOW VOLTAGE SWITCHES Manual Disconnect Device, Branch Circuit Protection Fuse, LSIS MC series Contactors and LSIS MT series Overload Relays
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by U, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
COMPONENT – CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Truck for PT/CPT, Cat. Nos. UPTR, followed by “-”, followed by 05 or 15, followed by PY, PD, CP, PS, PA or NPA, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Cradle for PT/CPT Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by A or B, followed by 15, followed by A, B or C, USR, CNR – Component – Medium Voltage Metal-Clad Assemblies. Compartments for PT, Cat. Nos. UPCL, followed by “-”, followed by 05 or 15, followed by AL, AM, AF, AE, BC, BF, BE, NAL, NAM, NAF or NAE, followed by 25 or 32, followed by A, followed by 12 or 20.
CIRCUIT BREAKERS AND METAL-CLAD SWITCHGEAR OVER 1000 VOLTS : Grounding and Testing Device, Cat. Nos. UVGT, followed by “-”, followed by 05 or 15, followed by Ms, followed by 25 or 32, followed by A, B, R or S, followed by 12 or 20, “-”, followed by A, may be followed by any combination of A, B, C, D.
MMS Series. Models MMS-32 followed by H or HI or S, maybe followed by -0.16, -0.25, -0.40, -0.63, -1.0, -1.6, -2.5, -4.0, -6.0, -8.0, -10, -13, -17, -22, -26, –32 or -40. Models MMS-63 followed by H or HI or S, maybe followed by -10, -13, -17, -22, -26, -32, -40, -50, –63 or -65. Models MMS-100 followed by H or HI or S, maybe followed by -17, -22, -26, -32, -40, -50, -63, -75, -90 or -100, MMS Front Mounted Auxiliary Contact Block Accessory Model FX, MMS Side Mounted Auxiliary Contact Block Accessory Model LX, MMS Shunt Release Accessory RS Series, MMS Undervoltage Release Accessory RU Series, MMS Undervoltage Release with Switch Accessory RUX Series, MMS Alarm Switch Accessory Model LA, MMS Alarm Switch for Magnetic Trip Accessory Model LAM, MMS Phase-Bus Devices, Type PB-322, PBL-322, PB-323, PBL-323, PB-324, PB-325, PB-632 and PB-633, Direct Adaptor devices, Type DA, followed by –16, –32, 63 or 95, MEH Handles for MMS Series, Models MEH followed by -32, -63 or -100, maybe followed by R, followed by -115 or -315, MMS Line Terminal Block, Type LTB-32, MMS Terminal Block, Type TB-32
Molded Case Switches, Types UTE100E MCS, UTE100N MCS, UTS150N MCS, UTS150H MCS, UTS150L MCS, UTS250N MCS, UTS250H MCS, UTS250L MCS, UTS400N MCS, UTS400H MCS, UTS400L MCS, UTS600N MCS, UTS600H MCS, UTS600L MCS, UTS800N MCS, UTS800H MCS and UTS800L MCS, UTS1200N MCS, UTS1200P MCS, UTS1200H MCS and UTS1200L MCS
ADAPTERS, CIRCUIT BREAKER : USL – Adapters, Molded-case Switches, Series UDL, followed by “-”, followed by S25, S32 or S40, followed by E, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S, may be followed by (P1) or (P2).
Circuit breaker or molded case switch accessory, alarm switch, auxiliary switch, shunt trip, and undervoltage trip intended for installation in Type UTE 100, TD 125NU, TD 125HU, TD 125NA, UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600, TS 800NU, TS 800HU, TS 800NA, UTS 800, UTS 1200
USL/CNL – Circuit breaker or molded case switch accessory, Motor Operator(MOP), type MOP-2U and MOP-3U intended for installation in Type UTS 150, TS 250NU, TS 250HU, TS 250NA, UTS 250, TS 400NU, TS 400HU, TS 400NA, UTS 400, UTS 600 circuit breakers or molded case switches