Download Center

File 1. [Susol & Metasol ACB] NA Manual

File 2. [Susol & Metasol ACB] PS Manual

Residual Current Device / RTU23U

USL, CNL – Adapters, low voltage power switching devices, Series UAL, followed by “-”, followed by S16, S20, S25, S32, S50 or s60, followed by D, E or G, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S.

Circuit Breaker Trip Units, Type N, A, P or S, followed by G, E, C, X, I, T, Q or R, followed by 0, 1, 2, 5, 6 or 7

Common Short Busbar, Cat. No.(Assembly) 70223466500, 70223466501, 70223466502

Enclosed PV Molded-Case Switch, Types UBCP-15-08, UBCP-15-16, UBCP-15-20, and UBCP-15-25.

Metal Enclosed Low Voltage Power Circuit Breaker Switchgear as Arc Resistant, Model USG, followed by “-”, followed by 25, 50 or 63, followed by A, followed by 10, followed by G, followed by 32, 40, 50 or 60, followed by 32, 40, 50 or 60.

Busbar, Cat. No. 70211176001, 70211176002

Enclosed PV Molded-Case Switch, Types UBCP-15-08, UBCP-15-16, UBCP-15-20, and UBCP-15-25.

UAS+16D4_H_FIXED.stp
UAS+16D3_V_FIXED.stp
UAS+16D3_V_DRAW.stp
UAS+16D3_H_FIXED.stp

Metal Enclosed Low Voltage Power Circuit Breaker Switchgear, Model USG, followed by “-”, followed by 25, 50 or 63, followed by N, followed by 100, followed by G, followed by 32, 40, 50 or 60, followed by 32, 40, 50 or 60.

USL, CNL – Low Voltage AC Power Circuit Breakers, Trip Unit – Type N, A, P or S, followed by L, H, F, D, Y, O or S, followed by 0, 1, 5 or 6.

LOW-VOLTAGE AC POWER CIRCUIT BREAKERS Series UA, followed by N, S, H or A, followed by “-”, followed by 04, 06, 08, 10, 13, 16, 20, 25 or 32, followed by E or X, followed by 3 or 4

Accessory Devices on Circuit Breaker : USL – Aux Switch (High capacity type), USL – Aux Switch (standard type), USL – Ready To Close Switch, USL – Charging Motor, USL – Thermo Sensor, USL – Trio Unit, USL – UVT Delay Controller, USL – Voltage Divide Module, USL – Counter, USL – Key Lock for Circuit Breaker, USL – Kirk Key, USL – PROFALUX KEY, USL – Key lock frame, USL – Button Lock for Circuit Breaker, USL – NCT Module, USL – Rating Plug, USL – Terminal Connection, Accessory Devices on Adaptor : USL – Cell Position Switches (drawout circuit breaker), USL – Door Interlock (drawout circuit breaker), USL – Safety Shutter (drawout circuit breaker), USL – Rack-in Interlock (drawout circuit breaker), USL – Mechanical Interlock (drawout circuit breaker), USL – Miss Insert Protection (drawout circuit breaker), USL – Mechanical Operated Cell Switch, Standard type (drawout circuit breaker), USL – Mechanical Operated Cell Switch, High capacity type (drawout circuit breaker), Field Installation Kit : USL – Door Frame, USL – Dust Cover, USL – Long Type Handle, USL – Bus Connection Kit, USL – Lifting Hook

LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USL, CNL – Low-voltage AC Power Circuit Breakers, Series UA, followed by S, H or A, followed by “-”, followed by 32, 40, 50 or 60, followed by G or Z, followed by 3 or 4

LOW-VOLTAGE AC POWER CIRCUIT BREAKERS Series UA, followed by N, S or A, followed by “-”, followed by 02, 04, 06, 08, 10, 13 or 16, followed by D or W, followed by 3 or 4

USL, CNL – Low Voltage AC Power Circuit Breakers, Trip Unit – Type N, A, P or S, followed by G, E, C, X or N, followed by 0, 1, 2, 5, 6 or 7

ccessories, for Low-Voltage AC Power Circuit Breaker, Series UA, Shunt Coil (SHT), Closing Coil (CC), Under Voltage Trip device (UVT), Reset Coil (RES)

INSTRUMENT TRANSFORMERS OVER 600 VOLTS

INSTRUMENT TRANSFORMERS OVER 600 VOLTS

Metal Enclosed Low Voltage Power Circuit Breaker Switchgear, Model USG, followed by 25, 50 or 63, followed by N, followed by 65 or 85, followed by D, followed by 20, 25, 32, 40, 50 or 60, followed by 08,10, 12 or 16.

CIRCUIT-BREAKER ACCESSORIES USL- Common Short Busbar, Cat. No.(Assembly) 70223467601, 70223467602, 70223467603

Series UD, followed by A, followed by “-”, followed by 08, 16, 20, 25, 32 or 40, followed by E, followed by 3 or 4, followed by “-”, followed by 00, followed by A,H,V,P,M or N, followed by XXXXXXXXXX.

SWITCHES, MOLDED CASE, FOR USE IN PHOTOVOLTAIC SYSTEMS : Series UD, followed by A, followed by “-”, followed by 08, 16, 20, 25, 32 or 40, followed by E, followed by 3 or 4, followed by “-”, followed by 00, followed by A,H,V,P,M or N, followed by XXXXXXXXXX.

ADAPTERS, CIRCUIT BREAKER : USL – Adapters, Molded-case Switches, Series UDL, followed by “-”, followed by S25, S32 or S40, followed by E, followed by 3 or 4, followed by “-”, followed by A, B or C, followed by H, V, P, M, N, G or W, followed by E or F, followed by S, may be followed by (P1) or (P2).

USL – Battery Power Supply Molded-case Switches, Series UD, followed by A, followed by “-”, followed by 08, 10 or 12 followed by C, followed by 3 or 4, followed by “-”, followed by 00, followed by A,H,V,P,M or N, followed by XXXXXXXXXX.

File 1. [Susol UL ACB] NA Manual

File 2. [Susol UL ACB] PS Manual

UAH+50G4_V_FIXED.stp
UAH+50G4_V_DRAW.stp
UAH+50G4_H_FIXED.stp
UAH+50G4_H_DRAW.stp
UAH+50G3_V_FIXED.stp
UAH+50G3_V_DRAW.stp
UAH+50G3_H_FIXED.stp
UAH+50G3_H_DRAW.stp

UAH+25E4_V_FIXED.stp
UAH+25E4_H_FIXED.stp
UAH+25E3_V_FIXED.stp
UAH+25E3_V_DRAW.stp

UAH+20E4_V_FIXED.stp
UAH+20E4_H_FIXED.stp
UAH+20E3_V_FIXED.stp
UAH+20E3_V_DRAW.stp
UAH+20E3_H_FIXED.stp

UL_5000AF(G)_Drawout.dwg
UL_3200AF(E)_Fixed.dwg
UL_3200AF(E)_Drawout.dwg
UL_1600AF(D)_Fixed.dwg
UL_1600AF(D)_Drawout.dwg

GSM-D